Current in Parallel Circuits
In previous sections the concept of Current flow was discussed. Current is the flow of charge through a circuit and is measured using an Ammeter. The following diagram shows a simple Parallel circuit with several Ammeters placed throughout:-
In the above circuit, there are two lamps in Parallel with a switch. There are 4 Ammeters in the positions shown.
As the total flow of Charge cannot change throughout the circuit (it cannot 'leak out'), the reading on A1 and A4 will be the same.
When the Current enters the Parallel branches, however, There is more than one path for it to follow, meaning that the Current will be shared between the branches.
For a Parallel circuit, the Current in each branch will be the add up to the supply Current.
A1 = A2 + A3 = A4
Voltage in Parallel Circuits
In previous sections the concept of Voltage was discussed. Voltage is the Energy per unit Charge supplied by the battery and is measured using a Voltmeter. The following diagram shows a simple Series circuit with several Voltmeters placed throughout:-
In the above circuit, there are two lamps in Series with a switch. There are three Voltmeters in the positions shown.
As the Voltage is the amount of Energy given to each coulomb of Charge passing through the circuit and each branch acts as an independent circuit, the Voltage across each branch is the same as the supply Voltage.
For a Parallel circuit, the Voltage across each branch is equal to the supply Voltage.
Vs = V1 = V2
